Yamaha MG12X-CV 12-Input Stereo Mixer w/ Effects

Housed in a rugged steel chassis, the MG12X CV can accommodate up to 12 inputs and offers a balanced stereo output. Featuring D-Pre discrete Class-A microphone preamplifiers for pristine sound, it includes AUX busses for the built-in SPX effect with 24 presets and another for monitoring. Four channels of single-knob compression are available.

The MG12X can accept XLR, 1/4” phone and RCA-type pin jack inputs, and offers XLR and phone outputs. The MG12X offers faders, and lit channel on/off switches for easy visual indication of settings. A footswitch input allows hands-free effect muting. The MG12X CV can be rackmounted with the optional RK-MG12 rackmount kit.

• Rugged, powder-coated steel chassis for superior durability
• Discrete Class-A microphone preamps
• Built-in SPX digital effects with 24 programs
• Switchable +48V phantom power
• Color-coded controls offer easy operation

• General
• Frequency response input to STEREO OUT: +0.5dB/-1.5dB (20Hz to 48kHz), refer to the nominal output level @ 1kHz, GAIN knob set to min
• Total Harmonic Distortion (THD+N) input to STEREO OUT: 0.03 % @ +14dBu (20Hz to 20kHz), GAIN knob set to min
• Crosstalk (1kHz): -78dB
• Hum and Noise (20Hz to 20kHz)
• Equivalent Input Noise: Crosstalk (1kHz)
• Residual Input Noise: -102dBu (STEREO OUT, STEREO master fader set to min)
• Input Channels
• Mono [MIC/LINE]: 4
• Mono/Stereo [MIC/LINE]: 2
• Stereo [LINE]: 2
• Output Channels
• STEREO OUT: 2
• MONITOR OUT: 1
• PHONES: 1
• AUX SEND: 2
• GROUP OUT: 2
• Bus
• STEREO: 1
• GROUP: 2
• AUX SEND: 2 (incl. FX)
• Input Channel Function
• Pad (mono): 26dB
• HPF (mono, mono/stereo): 80Hz, 12dB/oct (mono/stereo: MIC only)
• COMP (Mono)
• 1-knob compressor (mono) (Gain/Threshold/Ratio) threshold: +22dBu to -8dBu
• Ratio: 1:1 to 4:1
• Output level: 0dB to 7dB
• Attack time: Approx. 25 msec
• Release time: Approx. 300 msec
• EQ
• High: Gain: +15dB/-15dB, frequency: 10kHz shelving
• Mid: Gain: +15dB/-15dB, frequency: 2.5kHz peaking
• Low: Gain: +15dB/-15dB, frequency: 100Hz shelving
• Peak LED (mono)
• LED turns on when post-EQ signal reaches 3dB below clipping
• Power
• Phantom power voltage: +48V
• Power requirements: AC 100–240V, 50/60Hz
• Power consumption: 22W
• Other
• Pre-monitor level meter: 2 x 12 segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB]
• SPX algorithm: 24 programs
• Dimensions (WxHxD): 12.1" x 4.6" x 16.6"
• Net weight: 9.3 lb.