- Bass Guitar Accessories
- Inspection and Set-up
*These are stock photos. For actual photos of the instrument, please contact us.
Combining premium materials with a stellar amplification system, the Ibanez Bass Workshop UB804 represents big value in an upright electric bass.
Its fretless jatoba fingerboard sits atop a 5-piece maple/walnut neck, with a 34-inch scale length that makes for a smooth transition from an electric bass guitar. Its AeroSilk piezo pickup system allows you to switch seamlessly between playing with fingers and playing with a bow, delivering great tone either way.
- Comes with a padded gigbag and a stand (bow not included)
A padded gig bag can carry everything in it, including the bass itself, bow (bow is not included) and stand. Comes with padded bag and stand. The bow is not included.
AeroSilk Piezo pickup custom for Upright
Whether bowing or finger picking, this specially modified piezo system detects the vibrations of the strings that vibrates in different shapes, and then outputs the signals at equalized level.
Jatoba has a reddish brown color which produces a rich mid range with a crisp high end.
TAMA® Roadpro stand custom for Upright included
- neck type UB4 5pc Maple/Walnut neck-through
- top/back/body Maple body
- fretboard Jatoba White dot inlay
- fret Fretless
- bridge Custom AeroSilk MR5 bridge
- string space 30mm
- factory tuning 1G, 2D, 3A, 4E
- strings D'Addario® ECB81
- string gauge 045./065./080./100
- hardware color Black
- NECK DIMENSIONS
- Scale : 864mm/34"
- a : Width 42mm at NUT
- b : Width 84mm at 24F
- c : Thickness 35mm at 1F
- d : Thickness 42mm at 12F
- Radius : 60 - 90mmR
At Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.
First, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets to manufacturer factory specifications. Any request made outside of manufacturer factory specifications can incur additional charges for parts and labor. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly.
After a thorough inspection, we then move on to maintenance. We start by lubricating any moving parts on the instrument, such as tuning machines. We then move on to cleaning and oiling the fretboard along with the frets.
Once maintenance is done, we stretch and tune the strings and play test the instrument. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment.
We’re excited to be a part of your instrument buying experience.