- Inspection and Set-up
- Humidity Care
*Photos shown are of the actual guitar. This is a limited edition. Serial Number 1207122020.
This limited-edition GT 811e takes Taylor's compact, portable GT body shape to the next level with stunning appointments and a boldly striped sinker redwood top. The redwood, sourced from logs submerged in California riverbeds, is paired with solid Indian rosewood back and sides. Redwood boasts a high volume ceiling with much of cedar's warmth and touch sensitivity, while rosewood's lush overtone character, warm low end and crisp highs contribute to a flavorful tone profile.
Special appointments for this NAMM limited-edition model include a richly striped West African ebony fretboard and peghead veneer, maple binding, top purfling in black and maple with rosewood edge trim, a single-ring rosette in green abalone with a bound soundhole, a mother-of-pearl peghead inlay, a 4.5-mil full-body gloss finish, smoked nickel tuners, a rosewood pickguard and bone bridge pins with awabi (abalone) dots.
- Back & Side Wood: Indian Rosewood
- Top Wood: Sinker Redwood
- Nut Width: 1.724
- Scale Length: 24-1/8
- Bracing: C-Class
- Electronics: ES2
- Case: Brown AeroCase
- Grand Theater body size
- Top solid sinker redwood
- Neck profile: C-bracing
- Back and sides solid rosewood (Dalbergia Latifolia)
- Maple body binding
- Single Shell Ring/Abalone rosette
- Neck mahogany
- Fingerboard and bridge made of ebony
- Scale: 612 mm (24 1/8")
- Nut width: 43.80 mm (1.724)
- Taylor Smoked nickel mini tuners
- Pickup Taylor ES2
- Finish: Natural
- Incl. AeroCase
- Made in USA
At Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.
First, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets to manufacturer factory specifications. Any request made outside of manufacturer factory specifications can incur additional charges for parts and labor. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly.
After a thorough inspection, we then move on to maintenance. We start by lubricating any moving parts on the instrument, such as tuning machines. We then move on to cleaning and oiling the fretboard along with the frets.
Once maintenance is done, we stretch and tune the strings and play test the instrument. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment.
We’re excited to be a part of your instrument buying experience.
Acoustic guitars and ukulele are made of wood, and wood is sensitive to changes in climate. Shifts in temperature or relative humidity can affect your instrument in multiple ways, some of which can lead to costly repairs if you’re not careful. Solid woods in particular are especially prone to the effects of climate fluctuation. For example, extended exposure to low relative humidity (below 40% RH) can dry out the wood, causing it to shrink and run the risk of cracking. Similarly, excessive humidity can cause the wood to absorb moisture and swell, potentially causing other problems. Without adequate humidity control (especially in drier local climates), acoustic instruments can crack and their necks can warp, causing problems with fretting, intonation and playability.
So how do you prevent this kind of damage? Easy: by keeping your guitars and ukulele properly humidified (ideally between 40-60% RH). The easiest way to do this is by storing your instruments in a case with a case two-way humidifier inside. A two-way humidifier will slowly absorb or release moisture inside your case, maintaining humidity to help ensure your instrument doesn’t suffer damage. Using a digital hygrometer can help you monitor humidity levels around your instrument.
Symptoms of a dry acoustic instrument:
- Low action. Strings are very close to the fretboard.
- Hump on the fretboard where the neck joins the body.
- Sunken top across the soundboard between bridge and fingerboard.
- The back of instrument looks very flat when it is dried out.
- Sharp fret ends extend beyond the edge of the fretboard.
- The plane of the neck angle on a dry instrument hits above the top of the bridge.
Symptoms of a wet acoustic instrument:
- High action. Strings that are unusually high off the fretboard, making it difficult to play.
- Unusually swollen top
- Unusual warp on the top, back or both at the end-block
- Improper neck angle. Sighting the neck to the bridge, the frets will appear to hit below the bridge.
Using patented technology, the D’Addario Two-Way Humidification System features disposable, moisture-filled packets with a breathable membrane that provides two-way humidity control, meaning it can either release or absorb moisture to consistently maintain a predetermined relative humidity (RH) level of 45-50 percent.
Music Nomad the leader in equipment care products, has developed an easy to use, no mess, and low maintenance Ukulele humidifier. The Humilele rests securely on top of the strings to safely and evenly hydrate your Ukulele to avoid these problems.
Final Notes on Humidity Control
To monitor the amount of humidity your instrument is receiving, we recommend the purchase of a digital hygrometer, a device that gauges and provides a read-out of humidity levels. It can be kept in the room where you store your instruments, or, better yet, in a central location inside the instrument case, preferably Velcro’d to the outside of the accessories compartment (facing the heel). The optimal range for your guitars and ukulele is 45-55% RH.