IK Multimedia IP-IRIG-ACOSTG iRig Acoustic Stage Advanced Digital Microphone System for Acoustic Guitar

iRig Acoustic Stage is the new hi-tech solution for accurately reproducting the full sound of acoustic guitars and other instruments with studio-quality sound live on stage and in the studio. The combination of its advanced MEMS microphone and hi-quality preamp and DSP processing unit provides — for the first time ever — a break-through solution that offers hi-quality natural sound, advanced features, ease of installation and a convenience never seen before.

Includes: iRig Acoustic Stage DSP/interface, iDedicated iRig Acoustic microphone, iBelt clip, iCarrying case, i2 x 1.5V AA Battery

• Advanced MEMS microphone clips on to sound hole
• Preamp/DSP unit
• Dramatically improves your live acoustic sound
• 1/4" AUX input with volume for piezo, magnetic pickups or other onboard electronics
• 1/4" Output with level control for amplifier or PA system
• USB audio out for recording on a computer or mobile device
• Cancel Feedback with multiple frequency feedback cancelling
• 6 tone presets
• Personal instrument calibration
• Works on any acoustic, acoustic electric or ukulele with round sound hole
• Phase switch for optimizing dual source sound

Dedicated iRig Acoustic Microphone
Microphone Type: MEMS
Polar Pattern: omnidirectional
Frequency Response: 30 Hz - 20 kHz, +/-3dB
Max SPL: 130dB SPL
Signal-to-Noise Ratio: 101 dBA
Maximum soundboard thickness: 4mm / 0.16"

Connections
Dedicated iRig Acoustic Microphone Input: 2.5mm / 3/32" TS mono jack
AUX Instrument Input Connector: 6.3mm / 1/4" TS mono jack
AUX Instrument Input Impedance: 1 MOhms
Analog Output Connector: 6.3mm / 1/4" TS mono jack, line-level, low impedance
Analog Output Impedance: 50 Ohms (can drive long cables without any loss)
Digital Output Connector: micro-USB

DSP/Interface
AD and DA Resolution: 32-bit
Sampling Rate: 48 kHz
Interface Output: USB class compliant audio output via micro-USB port
Power: battery power (2xAA), USB bus power
Battery Life: approximatively 12 hours of continuous usage with alkaline batteries and 15 hours with rechargeable high quality Ni-MH AA cells (2000 mAh and up)

Dimensions
DSP/Interface size: 101mm/3.98" x 72.3mm/2.85" x 23mm/0.91" (belt clip excluded)
DSP/Interface weight: 99g/3.49oz (batteries excluded)
Microphone size: 31.7mm/1.25" x 32.2mm/1.27" x 18.8mm/0.74"
Microphone weight: 20g/0.71oz
Microphone cable length: 150cm/59.1"

Computers
Mac: Mac OS X 10.6 or later. One free USB port. A USB to Micro-USB cable (sold separately) is required.
Windows: Fully supports Windows 10 WASAPI for low latency audio. One free USB port. (ASIO4ALL is required on Windows 7 and 8 for low latency audio. See our FAQ here for further details.) A USB to Micro-USB cable (sold separately) is required.

iOS Devices
Compatible with iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini. iOS 6.0 or later is required. A USB to Micro-USB cable (sold separately) and a Lightning to USB Camera Adapter (sold separately) are required.

Android Devices
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities. A Micro-USB-OTG to Micro-USB cable (sold separately) is required.