FREE SHIPPING on qualifying orders $50 and up*
Gibson LPSKH00GGNH1 Kirk Hammett "Greeny" Les Paul Standard - Greeny Burst-Easy Music Center
Gibson LPSKH00GGNH1 Kirk Hammett "Greeny" Les Paul Standard - Greeny Burst-Easy Music Center
  • Load image into Gallery viewer, Gibson LPSKH00GGNH1 Kirk Hammett "Greeny" Les Paul Standard - Greeny Burst-Easy Music Center
  • Load image into Gallery viewer, Gibson LPSKH00GGNH1 Kirk Hammett "Greeny" Les Paul Standard - Greeny Burst-Easy Music Center

Gibson LPSKH00GGNH1 Kirk Hammett "Greeny" Les Paul Standard - Greeny Burst

Gibson
$2,999.00
$2,999.00
$2,999.00
Sold out
Shipping calculated at checkout.
We have 1 in stock, in-store.

*These are stock photos. For actual photos of the instrument, please contact us.

Three Legendary Guitarists, One Legendary Guitar
The story of “Greeny” is shrouded in mystery, but few guitars are as illustrious. Greeny is one of the most iconic original Les Paul™ Standards ever made, with a unique sound as recognizable as the guitar itself. Previously owned by Peter Green, it was used throughout his time with Fleetwood Mac and later sold to Gary Moore, who used it for three decades with Thin Lizzy and as a solo artist. Now owned by Kirk Hammett, Greeny has passed through the hands of three legendary guitarists. Its distinctive sound is partly from the out-of-phase middle switch position due to the neck pickup’s reversed magnetic polarity. The Kirk Hammett Signature Les Paul Standard "Greeny" was inspired by this legendary guitar and gives players around the world the opportunity to experience some of the magic of "Greeny" for themselves. An Original Series hardshell case is included.

  • Body
    • Body Style: Les Paul
    • Body Shape: Les Paul
    • Body Material: Mahogany
    • Top: AAA Figured Maple
    • Binding: Single Ply Cream, Top and Fretboard
    • Body Finish: Satin Nitrocellulose Lacquer
  • Neck
    • Profile: 50s Vintage
    • Scale Length: 628.65 mm / 24.75 in
    • Fingerboard Material: Indian Rosewood
    • Fingerboard Radius: 304.8 mm / 12 in
    • Fret Count: 22
    • Frets: Medium Jumbo
    • Nut Material: Graph Tech
    • Nut Width: 43.053 mm / 1.695 in
    • End Of Board Width: 57.404 mm / 2.26 in
    • Inlays: Acrylic Trapezoid
    • Joint: Glued In, Set Neck
  • Hardware
    • Finish: Nickel
    • Bridge: ABR-1 Tune-O-Matic
    • Tailpiece: Aluminum Stop Bar
    • Tuning Machines: Grover Rotomatics with Contemporary Buttons
    • Pickguard: Cream (Not Installed)
    • Truss Rod: Adjustable
    • Truss Rod Cover: 2-ply Bell; Black and White
    • Control Knobs: Amber Top Hats and Gold Top Hats with Silver Reflector & Pointers
    • Switch Tip: Cream
    • Switch washer: Cream
    • Jack Plate Cover: Black
    • Strap Buttons: 2
  • Electronics
    • Neck Pickup: Greenybucker with Reversed Magnetic Polarity; Reverse Mounted
    • Bridge Pickup: Greenybucker
    • Controls: 2 Volume, 2 Tone, Hand-wired with Orange Drop Capacitors
    • Pickup Selector: 3-way Toggle
    • Output Jack: 1/4"
  • Miscellaneous
    • Strings Gauge: .010 .013 .017 .026 .036 .046
    • Case: Original Series Hardshell
    • Accessories: Gibson Accessory Kit

*Not all bags and cases fit all guitars. If you aren't sure, please check with us at the store. Admin@easymusiccenter.com or call 808-591-0999.

At Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.

First, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets to manufacturer factory specifications. Any request made outside of manufacturer factory specifications can incur additional charges for parts and labor. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly.

After a thorough inspection, we then move on to maintenance. We start by lubricating any moving parts on the instrument, such as tuning machines. We then move on to cleaning and oiling the fretboard along with the frets.

Once maintenance is done, we stretch and tune the strings and play test the instrument. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment.

We’re excited to be a part of your instrument buying experience.