Electro-Harmonix NANO-BM Nano Big Muff

We took the Big Muff Pi circuit and simply shrunk it without changing its rich, creamy, violin-like sustain and sound. The Nano Big Muff Pi works and sounds identical in every way to our classic NYC Big Muff Pi. Get a piece of the pi for yourself!

• Crushing distortion
• sustain with attitude
• Compact, rugged nano enclosure
• True bypass
• Adjustable tone
• 9-volt battery included
• 9V Power Jack – The Nano Big Muff Pi is powered from a 9V battery or you can use an optional 9VDC AC Adapter capable of delivering at least 25mA to the 9V power jack, such as the EHX9.6DC-200. The AC Adapter must have a center negative plug. The battery may be left in or taken out when using an AC Adapter. The Nano Big Muff has a current draw of approximately 3mA at 9VDC.
• Optional 9.6DC-200 power supply available
• Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h)
• Dimensions in mm: 70 (w) x 115 (l) x 54 (h)

• SUSTAIN CONTROL — adjusts the amount of sustain and distortion.
• TONE CONTROL — provides a range of sounds from high treble to deep bass. As you turn the knob clockwise the treble increases and bass decreases.
• VOLUME CONTROL — sets the output level. Footswitch & Status LED - When the LED is lit; the Nano Big Muff effect is active. When the LED is off, the Nano Big Muff is in True Bypass mode. The Footswitch toggles between effect and bypass modes.
• INPUT Jack – This ¼” jack is the audio input to the Nano Big Muff. The input impedance presented at this jack is 130 kΩ.
• AMP Jack – This ¼” jack is the audio output from the Nano Big Muff. When the Nano Big Muff is in Bypass mode, the AMP jack is connected directly to the INPUT jack.