- Bass Guitar Accessories
- Inspection and Set-up
*These are stock photos. Actual color and pattern may vary.
For 30 years the SR has given bass players a modern alternative. With its continued popularity, Ibanez is constantly endeavoring to answer the wider needs of a variety of players, at a variety of budgets. But no matter what the specs, the heart is the same-SR continues to excite with its smooth, fast neck, lightweight body, and perfectly matched electronics.
5pc Maple/Walnut neck
The 5pc Maple/Walnut neck provides tonal clarity and superior attack.
Jatoba has a reddish brown color and produces a rich mid range with a crisp high end.
Medium sized frets enhance the accuracy of your notes.
Nyatoh used as the body wood provides a rich mid-low end.
PowerSpan Dual Coil pickups
Developed by Ibanez, the exposed pole pieces of the PowerSpan Dual Coil pickups produce a stronger signal and increase the response of the higher frequencies without sacrificing low end. The result is a tone rich in harmonic detail and dynamic expression.
Ibanez Custom Electronics 3-band EQ
The Ibanez Custom Electronics 3-band EQ is our latest refinement on the concept of simple, straightforward, no-nonsense EQ control. The Boost and Cut for the Mid Control are each centered on slightly different frequencies, an innovation that delivers a preset range of the most favorable bass tones.
Accu-cast B120 series bridge
The B120's extra-wide string slots can accommodate even the heaviest of gauges. The walls and channels of the new bridge plate effectively "�trap"� the saddles, ensuring perfect directional uniformity.
3-way Power Tap switch
Accessed by the 3-way Power Tap switch, the pickups offer a choice of three tonal personalities: A rich humbucker sound, a pure single-coil sound, or an enhanced single coil sound"€� fattened by lows from the humbucker pickups.
- Color CFM
- Color Name Classic Silver Fade Metallic
- Country of origin Indonesia
- Number of Strings 4
- Left handed
- Neck Type SR4
- Neck Joint Bolt-on
- Neck Material 5pc Maple / Walnut
- Reinforcement rods -
- Neck finish Satin Polyurethane
- Neck thickness @ 1st fret (mm) 19.5
- Neck thickness @ 12th fret (mm) 21.5
- Scale (Inch) 34
- Nut width (mm) 38
- Number of fret 24
- Fretboard Material Jatoba
- Fretboard Radius (mm) 305
- Fret Type Medium
- Inlay White dot
- Body Material Nyatoh
- Body finish Gloss Polyurethane
- Bridge Accu-cast B120
- String spacing (mm) 19
- Nut Plastic
- Machine Head Ibanez machine heads
- Hardware color Cosmo black
- Neck Pickup PowerSpan Dual Coil
- Bridge Pickup PowerSpan Dual Coil
- Controls 1 Volume, 1 Balancer, Bass, Middle, Treble, 3-way Power Tap switch
- EQ Ibanez Custom Electronics 3-band EQ
- Other item(s) included Hex wrench, Cable
- String Gauges .045/.065/.085/.105
- Factory Tuning 1G,2D,3A,4E
- Included case or bag NO
At Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.
First, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets to manufacturer factory specifications. Any request made outside of manufacturer factory specifications can incur additional charges for parts and labor. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly.
After a thorough inspection, we then move on to maintenance. We start by lubricating any moving parts on the instrument, such as tuning machines. We then move on to cleaning and oiling the fretboard along with the frets.
Once maintenance is done, we stretch and tune the strings and play test the instrument. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment.
We’re excited to be a part of your instrument buying experience.