- Electric Guitar Accessories
- Inspection and Set-up
The Ibanez miKro might be small, but it’s no toy — it’s built to the same high standards as all our GIO series guitars. The GRGM21M has the same high output Infinity R pickups, same construction, same materials, same set-up and same expert inspection as all Ibanez instruments. It's just downsized, with a 22.2” scale Maple neck (instead of 25.5”), and a smaller Basswood body, but the GRGM21M is no less explosive than its bigger brother!
The open polepiece Infinity R pickups deliver well-balanced tone with dense, rich mids. The two Infinity R humbuckers are wired with a lever switch that offers five different tonal options.
The miKro is perfect for tour buses, songwriting, running scales while downloading and, of course, for young rockers and beginners.
- This Guitar Does Not Come with a Bag or a Case
- Ibanez IGBMIKRO Gig Bag for Mikro Guitars
The Maple neck provides stability and bright tonal character.
The Maple fretboard provide crisp, bright highs and strong upper mids.
- neck type GRGM Maple neck
- top/back/body Basswood body
- fretboard Maple fretboard Black dot inlay
- fret Medium frets
- number of frets 24
- bridge Ibanez F106 bridge
- string space 10.5mm
- neck pickup Infinity R (H) neck pickup Passive/Ceramic
- bridge pickup Infinity R (H) bridge pickup Passive/Ceramic
- factory tuning 1E,2B,3G,4D,5A,6E
- string gauge .010/.013/.017/.026/.036/.046
- nut Plastic
- hardware color Chrome
- NECK DIMENSIONS
- Scale : 564mm/22.2"
- a : Width 41mm at NUT
- b : Width 56mm at 24F
- c : Thickness 19.5mm at 1F
- d : Thickness 21.5mm at 12F
- Radius : 400mmR
At Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.
First, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets to manufacturer factory specifications. Any request made outside of manufacturer factory specifications can incur additional charges for parts and labor. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly.
After a thorough inspection, we then move on to maintenance. We start by lubricating any moving parts on the instrument, such as tuning machines. We then move on to cleaning and oiling the fretboard along with the frets.
Once maintenance is done, we stretch and tune the strings and play test the instrument. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment.
We’re excited to be a part of your instrument buying experience.