- Electric Guitar Accessories
- Inspection and Set-up
*These are stock photos. Actual color and pattern may vary.
Whether you're a solid body player looking to expand your tonal palate, or an acoustic player who wants to transition to electric, the AS53 is an affordable way to ease into the classic sounds of the semi-hollow guitar. The warm tone of the AS53 is built around two Infinity R humbucker pickups, mounted on a solid block of wood for increased sustain and reduced feedback. The set-in Artcore neck joins the Sapele body at the 17th fret for easy access to higher notes and the bound Laurel fingerboard is adorn with Pearl dot inlay and Medium frets. Rock, Country, Jazz or Blues, the AS53 will handle it all.
- This Guitar Does Not Come with a Bag or a Case
- neck type AS Artcore Nyatoh set-in neck
- top/back/side Sapele top Sapele back Sapele sides
- fretboard Bound Walnut fretboard White dot inlay
- fret Medium frets
- number of frets 22
- bridge Gibraltar Performer bridge
- string space 10.5mm
- tailpiece Quik Change III tailpiece
- neck pickup Infinity R (H) neck pickup Passive/Ceramic
- bridge pickup Infinity R (H) bridge pickup Passive/Ceramic
- factory tuning 1E,2B,3G,4D,5A,6E
- string gauge .010/.013/.017/.030/.042/.052
- hardware color Chrome
- NECK DIMENSIONS
- Scale : 628mm/24.7"
- a : Width 43mm at NUT
- b : Width 57mm at 22F
- c : Thickness 21mm at 1F
- d : Thickness 24mm at 9F
- Radius : 305mmR
- BODY DIMENSIONS
- a : Length 19 1/4"
- b : Width 15 3/4"
- c : Max Depth 2 5/8"
At Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.
First, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets to manufacturer factory specifications. Any request made outside of manufacturer factory specifications can incur additional charges for parts and labor. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly.
After a thorough inspection, we then move on to maintenance. We start by lubricating any moving parts on the instrument, such as tuning machines. We then move on to cleaning and oiling the fretboard along with the frets.
Once maintenance is done, we stretch and tune the strings and play test the instrument. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment.
We’re excited to be a part of your instrument buying experience.