LR Baggs AS-DI Align Series - Active DI

Building upon decades of experience creating studio-quality gear for the stage, the Align Active DI is the embodiment of LR Baggs engineering at its highest level and uses the most pristine circuitry LR Baggs has developed in a DI. Their all-discrete design preserves the authenticity of your sound while providing high headroom for a wide range of signals.

• XLR and 1/4" outputs
• Pad boosts or cuts XLR out to meet the needs of the PA
• Ground lift switch effectively eliminates ground-loop noise
• Thru/Out switch for added output versatility
• Phase inversion for best sound and feedback control
• Mute footswitch for accessible control of your signal when switching instruments or in between sets
• 9V battery, 9V DC, or 48V phantom powering options

• 1/4” INPUT
• Input Impedance: 2.2 Megohms
• Preamp Gain: 0dB, -10dB, -20dB
• Input Level: -25dBv to +8.5dBv (0.056Vrms to 2.651Vrms)
• Frequency Response: 20Hz – 60kHz (-1dB point)
• LINE OUTPUT
• Output Level: +8.5dBv (2.651Vrms) Unbalanced
• Output Impedance: 470 Ohms
• DI OUT
• Output Level: +8.5dBv (2.651Vrms) Balanced
• Output Impedance: 620 Ohms
• POWER
• DC Power Consumption: 27mW Max at 9V
• DC Current Draw: 2.8mA
• Voltage Range: 7.5VDC – 12VDC
• Power Supply: 9VDC with 100mA minimum
• *IMPORTANT: polarity Pos (+) on outside, Gnd (-) on center
• 9V Battery Life: 180 hours
• Phantom Power: 48V
• Signal to Noise: 90dB, Unweighted
• PHYSICAL CHARACTERISTICS
• 0.85 Lbs, 5” Length x 3.25” Width x 2” Depth