- Bass Guitar Accessories
- Inspection and Set-up
*These are stock photos. Actual color and pattern may vary.
TRBX600 Series: Great tone, outstanding comfort, boutique looks.Â
This series is all about the balance of elements, and with the punchy tone of a 3D-scuplted, alder/maple-laminated body, timeless looks and the power of the Yamaha 3-band active/passive preamp, the TRBX600 sets a new standard of perfection.
- Alder/Maple body construction
- Flamed maple top
- Maple/Mahogany 5-Piece Neck
- Slim 1 1/2 " (38 mm) nut width
- 3-Band Active EQ with active/passive preamp
- Battery Alert LED
TRBX600 features controls for master volume, balance and 3-band EQ with an active/passive switch for maximum flexibility.
YGD H5 pickups are defined by a clean, open tone thatâ€™s perfectly matched with the flexibility of the active/passive preamp design. Their quad-pole piece design and alnico magnets give them the power to drive the active circuit and the sensitivity and subtlety to capture every nuance in passive mode.
Electronics (Active/Passive Selecter and Battery Alert)
TRBX600 models feature an audiophile-grade active/passive circuit for fine, tonal control and extreme flexibility. This advanced design offers a level-matched output, whether in passive or active mode, and tone-switching circuitry that seamlessly moves from treble control to master passive tone. High-quality, gold-plated parts are used for key signal chain contacts, providing increased conductivity and reliability, and the LED low battery alert installed on the back panel helps to prevent sudden power loss during performances.
A sculpted, alder/maple-laminated body with a mass-optimized 3D design strikes the optimal balance between tone and comfort coupled with perfect weight distribution.
The TRBX neck design combines an ultra-comfortable profile with 5-piece maple/mahogany-laminated construction for outstanding stability and excellent tone.
Developed through hundreds of hours of testing, the refined neck joint shape perfectly balances strength, vibration transfer and upper-fret access.
Straight string pull from nut to machine head eliminates lateral tension, providing superior tuning stability and reducing overtones.
38mm (4-string) or 43mm (5-string) nut widths give fast, comfortable playability for any style.
A high-mass, die-cast bridge efficiently transfers string vibrations to the body for a full, rich tone combined with excellent adjustability and road-tested durability. The 18mm spacing on the 5-string model offers outstanding playability for technical slap or finger styles.
The Yamaha metal, plate-mounted standard jack socket offers superior durability and easy maintenance.
- Construction Bolt-on
- Scale Length 34" (863.6 mm)
- Body Materials Flamed Maple/ Alder
- Body Finish Translucent Black, Dark Red Burst: Gloss Polyurethane, Matte Amber, Natural Satin: Satin Polyurethane
- Neck Materials Maple/Mahogany 5pcs
- Neck Finish Satin Polyurethane
- Fingerboard Materials Rosewood
- Fingerboard Radius 10" (250 mm)
- Fret Wire Medium
- Number of Frets 24
- Nut Materials Urea
- Width @ 0 Fret / 12th Fret 1.5 / 2.22" (38.0 / 56.4 mm)
- Thickness @ 1st Fret / 12th Fret 0.76 / 0.84" (19.5 / 21.5 mm)
- Neck Pickup Double Coil / Alnico V
- Bridge Pickup Double Coil / Alnico V
- Controls Master Volume, Pickup Balancer, 3-BAND EQ(Bass, Middle, Treble), Active/Pssive Switch.
- Bridge Die-cast
- String Spacing 0.74" (19 mm)
- Tuning Machines Covered / Die-cast
- Pickguard No
- String Gauge 0.045-0.100
- Case No
At Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.
First, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets to manufacturer factory specifications. Any request made outside of manufacturer factory specifications can incur additional charges for parts and labor. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly.
After a thorough inspection, we then move on to maintenance. We start by lubricating any moving parts on the instrument, such as tuning machines. We then move on to cleaning and oiling the fretboard along with the frets.
Once maintenance is done, we stretch and tune the strings and play test the instrument. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment.
We’re excited to be a part of your instrument buying experience.