- Bass Guitar Accessories
- Inspection and Set-up
These bass features Ash tops with a stunning black and silver finish on a Okoume body, as well as the new ?Accu-cast B505?. The Ash top offers superior tonal clarity and attack, while the Okoume body delivers a warm and fat low end. The principal feature of the new bridge is the saddles can be adjusted for various string spacing. The bridge was developed in an effort to meet the needs of various players who enjoy different string spacing. The saddles can be easily adjusted to widen or tighten the string spacing by + / - 1.5mm. It also allows for precise intonation and delivers excellent string-to-body vibration.
The thin, sturdy, and stable Jatoba / Walnut neck offers superior playability when combined with the extended neck joint, making the upper frets easily accessible. The truss rod adjustment at the neck pocket allows you to easily fine-tune the neck without loosening the strings. The Ibanez Custom 3-band electronics and 3-way mid-frequency switch allow for precise tonal control with EQ points at 250 Hz, 450 Hz, and 700 Hz. The Bartolini? BH2 dual-coil pickups, with their lower resonant frequency, provide a balanced warm response, tighter bottom end, and a fuller midrange.
The smooth fast neck, lightweight body, and perfectly matched electronics, are engineered to satisfy the particular needs of bassists, as well as inspire their creativity.
- This Bass Guitar Does Not Come with a Bag or a Case
- SR5 5pc Jatoba / Walnut Neck
- Jatoba Fingerboard
- Medium frets
- Ash Top / Okoume Body
- Bartolini BH-2 neck pickup
- Bartolini BH-2 bridge pickup
- Ibanez Custom Electronics 3-band EQ
- 3-way Mid frequency switch
- Accu-cast B505 bridge
- Black matte Hardware
At Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.
First, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly. All instruments are set-up to factory specifications. Any requests made outside of those specifications can incur part and labor charges.
After a thorough inspection, we then move on to maintenance. We start by lubricating any moving parts on the instrument, such as tuning machines. We then move on to cleaning and oiling the fretboard along with the frets.
Once maintenance is done, we stretch and tune the strings and play test the instrument. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment.
We’re excited to be a part of your instrument buying experience.