- Inspection and Set-up
- Humidity Care
*These are stock photos. For actual photos of the instrument, please contact us.
The Cole Clark CCAN3ECRDCLAE ANGEL 3 EC is a cutaway grand auditorium acoustic guitar, crafted from all-solid sustainable timber. The guitar features an internally carved top and back, ensuring excellent sound projection and resonance. The body of the guitar is made from AAA-grade Camphor Laurel for the back and sides, while the face is constructed from Australian-grown, AAA-grade American Redwood.
This guitar comes with a Cole Clark PG3 pickup system, making it a great choice for performing musicians. The finish is a natural satin nitrocellulose, which enhances the wood grain and adds a protective layer to the guitar. The neck is made of Queensland Maple, while the fretboard and bridge are crafted from She Oak. The inlays are Abalone and can be found on the fretboard, waist, and rosette.
It's important to note that this guitar is not recommended for percussive playing. Additionally, due to the natural grain of the wood used in its construction, the grain may vary from one guitar to another. Unfortunately, there is no left-handed version of this guitar available.
- This guitar comes with a case
- All solid timber cutaway grand auditorium with internally carved top and back
- Made entirely from sustainable timbers
- Cole Clark PG3 pickup system
- Finish: Nitrocellulose (natural satin)
- Neck: Queensland Maple
- Top: Australian grown, AAA grade American Redwood
- Back/Sides: AAA grade Camphor Laurel
- Inlaid timber binding and purfling
- Bridge/Fretboard: She Oak
- Inlays: Abalone (fretboard, waist, and rosette)
- Machine Heads: Grover Gold
- Nut/Saddle: Graph Tech Tusq
- Strings: Phosphor Bronze 12-53
- Nut Width: 44mm/1.73"
- Radius: 12"
- Scale length: 25.5"
- Cole Clark Hardcase - Tweed
- Pickguard supplied in case
- Left-handed version not available
- NOT for percussive playing
- Grain may vary
At Easy Music Center, we care for our instruments from the moment they arrive to when they ship to your door. All instruments are stored in a climate controlled environment and put through a 12-point inspection checklist before being shipped.
First, we check the finish of the instrument, carefully inspecting any blemishes on the surface. Next, we check the playability and setup by inspecting and adjusting the truss rod (if available), bridge, nut, and frets to manufacturer factory specifications. Any request made outside of manufacturer factory specifications can incur additional charges for parts and labor. If the instrument has electronics, we test all of the electronic components to make sure they are functioning properly.
After a thorough inspection, we then move on to maintenance. We start by lubricating any moving parts on the instrument, such as tuning machines. We then move on to cleaning and oiling the fretboard along with the frets.
Once maintenance is done, we stretch and tune the strings and play test the instrument. After this, we do a final inspection and clean/detail the instrument before packing it up for shipment.
We’re excited to be a part of your instrument buying experience.
Acoustic guitars and ukulele are made of wood, and wood is sensitive to changes in climate. Shifts in temperature or relative humidity can affect your instrument in multiple ways, some of which can lead to costly repairs if you’re not careful. Solid woods in particular are especially prone to the effects of climate fluctuation. For example, extended exposure to low relative humidity (below 40% RH) can dry out the wood, causing it to shrink and run the risk of cracking. Similarly, excessive humidity can cause the wood to absorb moisture and swell, potentially causing other problems. Without adequate humidity control (especially in drier local climates), acoustic instruments can crack and their necks can warp, causing problems with fretting, intonation and playability.
So how do you prevent this kind of damage? Easy: by keeping your guitars and ukulele properly humidified (ideally between 40-60% RH). The easiest way to do this is by storing your instruments in a case with a case two-way humidifier inside. A two-way humidifier will slowly absorb or release moisture inside your case, maintaining humidity to help ensure your instrument doesn’t suffer damage. Using a digital hygrometer can help you monitor humidity levels around your instrument.
Symptoms of a dry acoustic instrument:
- Low action. Strings are very close to the fretboard.
- Hump on the fretboard where the neck joins the body.
- Sunken top across the soundboard between bridge and fingerboard.
- The back of instrument looks very flat when it is dried out.
- Sharp fret ends extend beyond the edge of the fretboard.
- The plane of the neck angle on a dry instrument hits above the top of the bridge.
Symptoms of a wet acoustic instrument:
- High action. Strings that are unusually high off the fretboard, making it difficult to play.
- Unusually swollen top
- Unusual warp on the top, back or both at the end-block
- Improper neck angle. Sighting the neck to the bridge, the frets will appear to hit below the bridge.
Using patented technology, the D’Addario Two-Way Humidification System features disposable, moisture-filled packets with a breathable membrane that provides two-way humidity control, meaning it can either release or absorb moisture to consistently maintain a predetermined relative humidity (RH) level of 45-50 percent.
Music Nomad the leader in equipment care products, has developed an easy to use, no mess, and low maintenance Ukulele humidifier. The Humilele rests securely on top of the strings to safely and evenly hydrate your Ukulele to avoid these problems.
Final Notes on Humidity Control
To monitor the amount of humidity your instrument is receiving, we recommend the purchase of a digital hygrometer, a device that gauges and provides a read-out of humidity levels. It can be kept in the room where you store your instruments, or, better yet, in a central location inside the instrument case, preferably Velcro’d to the outside of the accessories compartment (facing the heel). The optimal range for your guitars and ukulele is 45-55% RH.